หมวดสินค้า |
---|
ทั้งหมด (1349) สินค้าไม่มีหมวดหมู่ (7) |
เข้าสู่ระบบ |
---|
ตะกร้าสินค้าของคุณ |
---|
ไม่มีสินค้าในตะกร้า |
สินค้าขายดี |
---|
|
รับข่าวสารทางอีเมล |
---|
แท็ก |
---|
ดู VDO การทำโครงงานทั้งหมดของ อ.ประเสริฐ ตรวจสอบสถานะไปรษณีย์ |
ชื่อสินค้า : SIM800โมดูลGSMส่งGPRS/mms/smsได้ รุ่น3G/4Gราคา:600บาท
|
---|
ลากเม้าเพื่อ ดูรายละเอียดเพิ่มเติม คลิ๊กดูรูปอื่นได้ จะสั่งซื้อกดที่รถเข็นด้านขวานี้ --)
|
รายละเอียดสินค้า รหัสสินค้า 012014 |
---|
เข้าชม : 18931 | สั่งซื้อไปแล้ว : มากกว่า5 | Wishlist Rate : 0
จำนวนในstock : stock
เพิ่มลง Wishlist
รุ่นนี้ใช้กับ sim3g,sim4g ได้แล้วนะครับ DTAC,AIS ทดสอบมาหมดแล้วครับ
ความเร็วเริ่มต้น 115200bps แก้ความเร็ว9600bps ใช้ AT+IPR=9600 Operating voltage: 3.7 ~ 4.2V (current peak 1A, please get processed) Support Network: China Mobile, China Unicom and global quad-band network Module size: 2.5cmx2.3cm Serial to TTL serial port, can be directly linked to the MCU. You do not need MAX232 The power module automatically boot, homing network Onboard one signal light (the signal slow flash, no flash signal) The world's smallest size, by no less than this module is a GSM module Full-chip processing machine, reflow soldering, stable performance
Lithium battery power supply can be directly, can also be used 5V power supply, Specifications
Usage with ArduinoGSM module with chip SIM00L is very popular in the community Arduino. It provides GSM (Global System for Mobile Communications) and GPRS (General Packet Radio Service) and SMS, USSD, voice and internet services support for TCP, UDP, HTTP and FTP. The module is supplied with a voltage of 3.4 V to 4.4 V and communicates with plate Arduino via serial interface. The operating mode is similar to Wifi module ESP-01: module receives a serial number of preset commands for accessing functions. The module responds to AT command set. For proper feeding, you can use an adjustable source, very useful if several projects with Arduino or a small fitting with regulator LM317 - a source linear variable output.
SIM800 module to communicate with SoftwareSerial.h we use library that allows us to use other digital pins for serial communication. For other details, such advantages or limitations examples of this library, you can access the following link:
We will use terminals 8 and 7 for connections with pins TX or RX of the GSM module. We will present a program that sends commands and displays them on serial. Examples of commands:
SIM800 command set is supported by very large, they have the possibility to receive various parameters and variations. Mobile phones operate using similar command sets.
Use GSM modules with Arduino Downloads
Product Pin Description:
GND: Ground Power
VCC_IN: power supply pin, input DC5V-20V, for supply to the board
RI: kernel-rings pins
DTR: Data Terminal Ready
TXD: pin serial port module, TTL level (not directly connected to RS232 level)
RXD: receive pin serial port module, TTL level (not directly connected to RS232 level)
U2_R: 2 serial receive pin module
U2_T: 2 serial transmit pin module
V_M: access target board microcontroller core voltage 5V / 3.3V (according to their own microcontroller to distinguish how much the kernel v), which pin is used to convert the GSM module board TTL logic TXD and RXD for the corresponding
ADC: ADC 检测
SPP: kernel audio output pin
SPN: kernel audio output pin
MC-: kernel audio input pin
MC +: kernel audio input pin
PWR: the pin low may be implemented to close or open the module
BAT: 锂电池 输入 引脚, 3.3v-4.4v
Product Features:
1. The input voltage range of 5V-20V DC, power supply suitable for various large range applications, student and project engineering more convenient, large peak current, low voltage, so the higher voltage power supply boards GPRS communication module, the current the smaller, the power pressure is smaller, when gprs module integrated into the product, it is necessary to consider the development of a power supply circuit board, such as the power supply line width 1mm or more, the shorter the better;
2 automatically boot module connected to the power network connection, no power-control buttons, a start power directly, eliminating the need for cumbersome boot process, the boot reserved pin, the user can implement their own control switch;
3. The charging module TTL level conversion circuit, compatible with various microcontroller serial. No conversion is directly connected;
4. The audio interface mode pin leads, convenient test reserved headphone and microphone jacks;
5. Bluetooth, Bluetooth 3.0 protocol, an enhanced version of Bluetooth antenna signal super, serial port support SPP and audio services;
6. The lithium battery BAT reservation interface may be used lithium battery, facilitate engineering, 3.7V lithium battery or 18650;
7. Reserved IPEX interfaces, interfaces the SMA spring antenna interface may be used on different days in different circumstances.
|
ภาพสินค้าอื่นๆ คลิ๊กที่รูป หากต้องการ Zoom กดแว่นขยาย ลาก mouse ที่ภาพเลื่อนซ้ายขวาได้ |
---|
1,800
ราคาสั่งจากหน้า web 600 บาท ราคาซื้อเองที่สาขา 600 บาท -5% 'สินค้านี้ต้องสั่งจอง' |
สินค้าที่เกี่ยวข้อง |
---|
|
|
|
|||
สุประเสริฐ | กรุงเทพ 022-707-23-94 | ออมทรัพย์ |
electhailand@gmail.com เมล์นี้ใช้ติดตามสินค้า สั่งสินค้า และสอบถามครับ